2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE CENTER BACK DOOR GARNISH

  1. B239438
    Detach the 4 clips and remove the back door center garnish.


2. REMOVE BACK DOOR SIDE GARNISH LH

  1. B239439
    Detach the 2 clips and claw and remove the back door side garnish.


3. REMOVE BACK DOOR SIDE GARNISH RH

  1. B239440
    Detach the 2 clips and claw and remove the back door side garnish.


4. REMOVE BACK DOOR TRIM COVER

  1. B239441
    Remove the back door trim cover as shown in the illustration.


5. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY

  1. B239442
    Remove the upper tool box panel sub-assembly as shown in the illustration.


6. REMOVE TOOL CASE

  1. B239445
    Detach the 2 claws and remove the tool case.


7. REMOVE BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type)

  1. B239466
    Remove the screw.

  1. Detach the 5 claws and remove the back door inside handle bezel.


8. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

  1. B241516
    Detach the claw and remove the cover.

    HINT:
    Tape the screwdriver tip before use.

  1. B239444
    Remove the screw.

  1. w/o Back Door Tire Carrier:

    1. B239446
      Remove the bolt.

    2. Detach the 15 clips and remove the back door trim panel assembly.

  1. w/ Back Door Tire Carrier:

    1. B239447
      Remove the bolt.

    2. Detach the 16 clips and remove the back door trim panel assembly.

  1. for Face to Face Seat Type:

    1. B241528
      Remove the screw and bolt.

    2. Detach the 15 clips and remove the back door trim panel assembly.


9. REMOVE BACK DOOR INSIDE HANDLE SUB-ASSEMBLY (for Face to Face Seat Type)

  1. B239467
    Detach the guide.

  1. Detach the claws and remove the inside handle sub-assembly.

  1. Disconnect the 2 cables from the inside handle sub-assembly.


10. REMOVE BACK DOOR SERVICE HOLE COVER

  1. B239449
    Remove the service hole cover.


11. REMOVE BACK DOOR OUTSIDE HANDLE LH

  1. w/ Back Door Tire Carrier:

    1. B239453E01
      Remove the hole plug.
      Text in Illustration 
      *1
      Hole Plug

    2. Remove the 2 nuts and back door outside handle.

    3. Disconnect the cable.

  1. w/o Back Door Tire Carrier:

    1. B239451
      Remove the 2 nuts and back door outside handle.

    2. Disconnect the cable.


12. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

B237841
  1. Disconnect the connector and remove the 4 nuts.

  1. Detach the 4 clips and remove the back door outside garnish.

← REMOVAL (Aug 2013 – Jul 2014)DISASSEMBLY (from Aug 2013) →