2013-2015 Land Cruiser Prado · Service Manual Steering

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
  1. Install the ECU with the bolt.

    Torque:
    2.8 N*m{ 28 kgf*cm , 24 in.*lbf }

  1. Connect the 2 connectors.

    NOTICE:
    The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

  1. Attach the wire harness clamp.


2. INSTALL NO. 1 INSTRUMENT LOWER PANEL AIRBAG ASSEMBLY
(Click here)

3. CHECK SRS WARNING LIGHT
(Click here)
← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →