2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2013


REMOVE DEICER RELAY
  1. Remove the deicer relay from the engine room relay block.


INSPECT DEICER RELAY

B060778E76
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Battery voltage not applied to terminals 1 and 2
    10 kΩ or higher
    3 - 5
    Battery voltage applied to terminals 1 and 2
    Below 1 Ω

    If the result is not as specified, replace the relay.


INSTALL DEICER RELAY
  1. Install the deicer relay to the engine room relay block.

← INSTALLATION (from Aug 2013)ON-VEHICLE INSPECTION (from Aug 2013) →