2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT SEAT ASSEMBLY RH
  1. for Manual Seat Type:
    (Click here)

  1. for Power Seat Type:
    (Click here)

  1. for Walk in Seat Type:
    (Click here)

  1. for Bench Seat Type:
    (Click here)


4. REMOVE AMPLIFIER COVER

B359358E01
Text in Illustration 
*A
for Pioneer Made
*B
for JBL Made
*C
w/ Seat Heater System
*D
w/o Seat Heater System
  1. Fold back the floor carpet.

  1. w/ Seat Heater System:

    1. Remove the 3 clips and amplifier cover.

  1. w/o Seat Heater System:

    1. Remove the 3 screws and clip.

    2. Detach the clamp and remove amplifier cover.


5. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY

B359359E01
Text in Illustration 
*A
for Pioneer Made
*B
for JBL Made
*C
w/ Seat Heater System
*D
w/o Seat Heater System
  1. Disconnect each connector.

  1. Remove the bolt and 2 screws.

  1. Detach the guide and remove the stereo component amplifier assembly.


6. REMOVE NO. 2 AMPLIFIER COVER

B359362E01
Text in Illustration 
*A
w/ Seat Heater System
*B
for JBL Made, w/o Seat Heater System
  1. w/ Seat Heater System:

    1. Detach the clamp.

    2. Remove the screw, bolt and No. 2 amplifier cover.

  1. for JBL Made, w/o Seat Heater System:

    1. Detach the 3 clips and remove the No. 2 amplifier cover.


7. REMOVE NO. 1 AMPLIFIER BRACKET

  1. Remove the 2 screws and No. 1 amplifier bracket.

    B359360E01

    Text in Illustration 
    *A
    for Pioneer Made
    *B
    for JBL Made
    *C
    w/ Seat Heater System
    *D
    w/o Seat Heater System


8. REMOVE NO. 2 AMPLIFIER BRACKET

  1. Remove the 2 screws and No. 2 amplifier bracket.

    B359361E01

    Text in Illustration 
    *A
    for Pioneer Made
    *B
    for JBL Made
    *C
    w/ Seat Heater System
    *D
    w/o Seat Heater System

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →