2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY
  1. Attach the clip and claw to install the front No. 3 speaker.

  1. Connect the connector.


2. INSTALL FRONT PILLAR GARNISH LH
  1. Attach the 3 guides to install the front pillar garnish.


3. INSTALL NO. 1 ASSIST GRIP

HINT:
Use the same procedure for the other No. 1 assist grip.

  1. Attach the 2 claws to install the No. 1 assist grip.

  1. Install the 2 bolts.


4. INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH

HINT:
Use the same procedure for the other front No. 1 assist grip plug.

  1. Attach the 2 claws to install the front No. 1 assist grip plug.


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2013 – Jul 2014)COMPONENTS (from Aug 2013) →