2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY RH

B242818E01

NOTICE:
Do not disassemble the retractor.

Text in Illustration 
*a
Unlock
*b
Lock
*c
45°
  1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks.
    If the operation is not as specified, replace the No. 1 seat 3 point type belt assembly RH.

  1. Check the fastening function of the child restraint system.

    NOTICE:
    The check should be performed with the outer belt installed.


    1. When the belt is pulled out fully, the belt should automatically start to retract.

    2. After the belt has fully retracted, the belt should be able to be pulled out and retracted again. If the operation is not as specified, replace the No. 1 seat 3 point type belt assembly RH.

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →