INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH |
![]() ![]() |
- NOTICE:
- Do not disassemble the retractor.
| *a |
Unlock |
| *b |
Lock |
| *c |
45° |
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks.
If the operation is not as specified, replace the No. 1 seat 3 point type belt assembly LH.


