2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. A bolt without a torque specification is shown in the standard bolt chart (Click here).
  2. Use the same procedure for RHD and LHD vehicles.
  3. The procedure listed below is for LHD vehicles.


1. INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY
  1. Install the double door lock control relay assembly with the nut.

  1. Connect the connector.


2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

B238219E01
  1. Connect each connector.

  1. Attach the 5 clips and claw to install the glove compartment door.

  1. Install the 2 bolts <C> and 2 screws <A> or <B>.

    Text in Illustration 
    *1
    Bolt
    *2
    Screw


3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.

  1. Install the screw.

    B298555E01

    Text in Illustration 
    *A
    for LHD
    *B
    for RHD


4. INSTALL INSTRUMENT PANEL ORNAMENT
  1. Attach the 5 clips to install the instrument panel ornament.


5. INSTALL INSTRUMENT SIDE PANEL RH
  1. Connect the connector.

  1. Attach the 5 clips, claw and 3 guides to install the instrument side panel.


6. INSTALL COWL SIDE TRIM BOARD RH

HINT:
Use the same procedure described for the LH side.


7. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.

← REMOVAL (from Aug 2014)INSTALLATION (from Aug 2014) →