INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT LUMBAR SWITCH ASSEMBLY (for LHD) |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (B) - 4 (H)
Hold
Below 1 Ω
1 (R) - 2 (E2)
1 (R) - 2 (E2)
Off
4 (H) - 5 (E1)
1 (R) - 3 (B)
Release
4 (H) - 5 (E1)
Text in Illustration *1
Hold Switch
*2
Release Switch
*a
Component without harness connected
(Lumbar Switch)
| INSPECT LUMBAR SWITCH ASSEMBLY (for RHD) |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (B) - 4 (H)
Hold
Below 1 Ω
1 (R) - 2 (E2)
1 (R) - 2 (E2)
Off
4 (H) - 5 (E1)
1 (R) - 3 (B)
Release
4 (H) - 5 (E1)
Text in Illustration *1
Hold Switch
*2
Release Switch
*a
Component without harness connected
(Lumbar Switch)



