2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL LUMBAR SWITCH ASSEMBLY
  1. Install the switch with the 2 screws.


2. INSTALL FRONT SEAT CUSHION SHIELD LH
  1. for Driver Side:
    Attach the 5 wire harness clamps and connect the 2 connectors.

  1. B239164
    Attach the 4 claws and clip to install the cushion shield.

  1. Install the screw.


3. INSTALL VERTICAL ADJUSTING HANDLE LH
  1. Install the handle with the screw.


4. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

B238106
  1. Attach the claw to install the handle.


5. INSTALL FRONT SEAT ASSEMBLY
  1. Install the front seat assembly (Click here).

← INSPECTION (from Aug 2013)INSTALLATION (from Aug 2014) →