2013-2015 Land Cruiser Prado · Service Manual Steering

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT TILT AND TELESCOPIC SWITCH

  1. C176286E02
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (VC) - 3 (MSW)
    Tilt up
    342 to 378 Ω
    Tilt down
    1890.5 to 2089.5 Ω
    Telescopic contract
    750.5 to 829.5 Ω
    Telescopic extend
    152 to 168 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Tilt and Telescopic Manual Switch)
    If the result is not as specified, replace the tilt and telescopic manual switch.

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →