2013-2015 Land Cruiser Prado · Service Manual Steering

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL TILT AND TELESCOPIC SWITCH
  1. Attach the claw to install the tilt and telescopic switch.

  1. Connect the connector.


2. INSTALL STEERING COLUMN LOWER COVER
  1. Install the 3 screws.

  1. Attach the 2 claws to install the steering column lower cover.

    NOTICE:
    Do not damage the tilt and telescopic switch.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
  1. Reset the auto tilt away function setting to the previous condition by changing the customize parameter (Click here).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


4. CHECK SRS WARNING LIGHT
(Click here)
← INSPECTION (from Aug 2013)INSTALLATION (from Aug 2014) →