REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
Remove the instrument panel safety pad sub-assembly (Click here).
| 2. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY |
Detach the clamp.

Disconnect the connector and remove the stop light control ECU.
