REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() ![]() |
for LHD:
Remove the screw.
Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover.
Disconnect each connector.
for RHD:

Remove the screw.
Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover.
Disconnect each connector.
| 2. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY |
Detach the 2 claws and remove the pre-crash system cancel switch assembly.

Text in Illustration *A
for LHD
*B
for RHD

