2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY

  1. B348974E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1(GND) - 2(ECU)
    Pressed
    Below 1 Ω
    Not pressed
    10 kΩ or higher

    If the result is not as specified, replace the pre-crash system cancel switch assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Pre-crash System Cancel Switch Assembly)

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →