2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

  1. E177502
    Install the headlight dimmer switch to the steering column, making sure that the stopper protrusions and cutout parts align.

  1. E198154
    While loosening the band clamp, attach the claw to install the headlight dimmer switch.

  1. Connect the connector.


2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Attach the claw to install the windshield wiper switch assembly.

  1. w/ Rain Sensor:
    Connect the connector.

  1. w/o Rain Sensor:
    Connect the 2 connectors.


3. INSTALL SPIRAL CABLE SUB-ASSEMBLY
  1. Install the spiral cable sub-assembly (Click here).

← INSPECTION (from Aug 2013)INSTALLATION (from Aug 2014) →