2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE SPIRAL CABLE SUB-ASSEMBLY
  1. Remove the spiral cable sub-assembly (Click here).


2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

  1. E202158
    w/ Rain Sensor:
    Disconnect the connector.

  1. E202159
    w/o Rain Sensor:
    Disconnect the 2 connectors.

  1. Detach the claw and remove the windshield wiper switch assembly.


3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

  1. E198153
    Disconnect the connector.

  1. E177501
    While loosening the band clamp as shown in the illustration, detach the claw to remove the headlight dimmer switch.

    NOTICE:
    If the claw is pressed forcefully, it will break.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →