REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
REMOVE SPIRAL CABLE SUB-ASSEMBLY |
 |
Remove the spiral cable sub-assembly (Click here).
| 2.
REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
|
 |
- w/ Rain Sensor:
Disconnect the connector.
- w/o Rain Sensor:
Disconnect the 2 connectors.
Detach the claw and remove the windshield wiper switch assembly.
| 3.
REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY |
 |
- Disconnect the connector.
- While loosening the band clamp as shown in the illustration, detach the claw to remove the headlight dimmer switch.
- NOTICE:
- If the claw is pressed forcefully, it will break.