INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/o Display) |
Attach the 4 claws to install the hazard warning signal switch assembly.
| 2. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/ Display) |
Attach the 2 claws to install the hazard warning signal switch assembly.
Connect the connector.
| 3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Display) |
Connect each connector.
Attach the 10 clips to install the center instrument cluster finish panel.
| 4. INSTALL NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System) |
| 5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
Connect the connector.
Attach the 4 clips to install the integration control and panel assembly.
