2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH

  1. E199488E01
    Install the height control sensor with the 2 bolts.
    Text in Illustration 
    *1
    Matchmarks

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }

  1. Align the matchmarks on the link and bracket.

  1. Connect the sensor link with the nut.

    Torque:
    5.6 N*m{ 57 kgf*cm , 50 in.*lbf }

  1. Attach the sensor connector, and then connect the connector.

  1. Attach the clamp.

← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →