2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH

  1. E199487
    Disconnect the connector, and then detach the connector.

  1. Detach the clamp.

  1. E199488E01
    Put matchmarks on the height control sensor.

  1. Remove the nut and disconnect the sensor link.

    Text in Illustration 
    *1
    Matchmarks

  1. Remove the 2 bolts and height control sensor.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →