REMOVAL
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE FRONT BUMPER COVER |
| 2. REMOVE FRONT BUMPER REINFORCEMENT STOPPER RH (for RH Side) |
Detach the 2 claws and front bumper reinforcement stopper RH.

| 3. REMOVE FOG LIGHT ASSEMBLY LH |
![]() ![]() |
Disconnect the connector.
Remove the 2 screws.
Detach the 2 guides and remove the fog light assembly LH.

