2013-2015 Land Cruiser Prado · Service Manual
Vehicle Exterior
Home
›
Vehicle Exterior
› LIGHTING (EXT) › REAR FOG LIGHT ASSEMBLY
REASSEMBLY
Removal / installation
·
Vehicles built from Aug 2013
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. INSTALL REAR FOG LIGHT BULB
Install the bulb.
2. INSTALL REAR FOG LIGHT SOCKET AND WIRE
Turn the socket in the direction indicated by the arrow to install it to the fog light unit.
← DISASSEMBLY (from Aug 2013)
INSTALLATION (from Aug 2013) →