2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR FOG LIGHT ASSEMBLY LH
  1. Attach the 2 claws and clamp to install the light.

  1. Install the screw.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }


2. INSTALL REAR BUMPER COVER
  1. Install the rear bumper cover (Click here).

← REASSEMBLY (from Aug 2013)COMPONENTS (from Aug 2013) →