2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE NO. 1 HEADLIGHT BULB

  1. E282524
    Turn the No. 1 headlight bulb in the direction indicated by the arrow to remove it.

    NOTICE:
    Do not touch the glass part of the bulb.


2. REMOVE NO. 2 HEADLIGHT BULB

  1. E282526
    Turn the No. 2 headlight bulb in the direction indicated by the arrow to remove it.

    NOTICE:
    Do not touch the glass part of the bulb.


3. REMOVE CLEARANCE LIGHT BULB

  1. E282528
    Turn the clearance light bulb socket with the clearance light bulb in the direction indicated by the arrow to remove them as a unit.

  1. E282530
    Remove the clearance light bulb from the clearance light bulb socket.


4. REMOVE FRONT TURN SIGNAL LIGHT BULB

  1. E282532
    Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to remove them as a unit.

  1. E282534
    Remove the front turn signal light bulb from the front turn signal light bulb socket.


5. REMOVE HEADLIGHT LEVELING MOTOR LH (w/ Headlight Leveling)

  1. E282536
    Detach the claw and rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration.

  1. E282538E02
    Turn the aiming screw of the headlight leveling motor LH in the direction of the arrow shown in the illustration and remove the headlight leveling motor LH.
    Text in Illustration 
    *1
    Aiming Screw


6. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING

  1. E229723
    Remove the headlight leveling motor base packing from the headlight unit LH.


7. REMOVE FRONT BUMPER BAR REINFORCEMENT LH

  1. E282540
    Remove the 2 screws and front bumper bar reinforcement LH.


8. REMOVE FRONT BUMPER BAR REINFORCEMENT LH

  1. E282541
    Remove the 2 screws and front bumper bar reinforcement LH.

← REMOVAL (from Aug 2013)ADJUSTMENT (from Aug 2013) →