2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE FRONT BUMPER COVER
(Click here)

2. REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH

  1. E282521
    Detach the 3 clips and remove the front fender side panel protector LH.


3. REMOVE HEADLIGHT ASSEMBLY LH

  1. E282522
    Remove the clip.

  1. Put protective tape around the headlight assembly LH.

  1. Remove the bolt and 3 screws.

  1. Disconnect each connector and remove the headlight assembly LH.

    E282523E02

    Text in Illustration 
    *1
    Protective Tape
    *2
    Bolt
    *3
    Screw
    -
    -

← COMPONENTS (from Aug 2013)DISASSEMBLY (from Aug 2013) →