INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) |


| *1 |
Connector A |
*2 |
Connector B |
| *a |
Component without harness connected (Front Seat Inner Belt Assembly) |
- |
- |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
A2 - B3
Always
Below 1 Ω
A3 - B1
Seat belt fastened
(Buckle switch on)
1 MΩ or higher
A3 - B1
Seat belt unfastened
(Buckle switch off)
Below 1 Ω
