2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR BUMPER COVER
(Click here)

2. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

  1. Remove the 2 bolts.

    E282566E02

    Text in Illustration 
    *A
    for LH Side
    *B
    for RH Side

  1. E282567E02
    Put protective tape around the rear combination light assembly LH.
    Text in Illustration 
    *1
    Protective Tape

  1. Move the rear combination light assembly LH in the direction of the arrow in the illustration, and detach the 4 clips.

  1. Disconnect the connector and remove the rear combination light assembly LH.

← COMPONENTS (from Aug 2013)DISASSEMBLY (from Aug 2013) →