2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
Only the license plate light lens needs to be removed in order to replace the license plate light bulb.


1. REMOVE BACK DOOR GARNISH OUTSIDE
  1. Remove the back door garnish outside (Click here).


2. REMOVE LICENSE PLATE LIGHT ASSEMBLY

  1. E198140
    Disconnect the connector.

  1. Remove the 4 screws and 2 lights.


3. REMOVE LICENSE PLATE LIGHT LENS
  1. Remove the lens.


4. REMOVE LICENSE PLATE LIGHT LENS GASKET
  1. Remove the gasket.


5. REMOVE LICENSE PLATE LIGHT BULB
  1. Remove the bulb.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →