REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Only the license plate light lens needs to be removed in order to replace the license plate light bulb.
| 1. REMOVE BACK DOOR GARNISH OUTSIDE |
Remove the back door garnish outside (Click here).
| 2. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
Disconnect the connector.

Remove the 4 screws and 2 lights.
| 3. REMOVE LICENSE PLATE LIGHT LENS |
Remove the lens.
| 4. REMOVE LICENSE PLATE LIGHT LENS GASKET |
Remove the gasket.
| 5. REMOVE LICENSE PLATE LIGHT BULB |
Remove the bulb.
