2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE FRONT EXHAUST PIPE ASSEMBLY
(Click here)

2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

A245476

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.


3. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

A245477E02

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.

    Text in Illustration 
    *A
    for Automatic Transmission
    *B
    for Manual Transmission


4. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

A245478

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Detach the sensor wire harness.

  1. Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →