ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT FAN AND GENERATOR V BELT |
Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the fan and generator V belt.- The belt is cracked.
- The belt is worn out to the extent that the cords are exposed.
- The belt has chunks missing from the ribs.
- The belt is cracked.
Check that the belt fits properly in the ribbed grooves.

Text in Illustration *a
CORRECT
*b
INCORRECT
- HINT:
- Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the V belt. Install a new V belt correctly.
Check that the tensioner indicator mark is within range A shown in the illustration.

If the mark is not within range A, replace the fan and generator V belt.Text in Illustration *1
Bracket Side Indicator
*2
Arm Side Indicator
*3
Fan and Generator V Belt
*4
Tensioner
| INSPECT V-RIBBED BELT TENSIONER ASSEMBLY |
Turn the pulley and check that the tensioner bearing moves smoothly and quietly.

If necessary, replace the tensioner pulley.Text in Illustration *a
Turn
