2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

B1550 DAB Tuner Malfunction

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Also covers:

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation receiver assembly.
DTC Code
DTC Detection Condition
Trouble Area
B1550
Digital radio tuner has a malfunction
Navigation receiver assembly
B15A0
When either of the conditions below is met:
  1. Bus malfunction
  2. EEPROM error
  3. DSP error
B15AD
When one of the conditions below is met:
  1. Short to ground or +B, or open occurs in gyro signal circuit
  2. Gyro sensor malfunction
  3. GPS receiver malfunction
B15B0
Picture circuit (TFT unit) malfunction
B15B3
When one of the conditions below is met:
  1. AM tuner PLL is unlocked
  2. FM tuner PLL is unlocked
  3. Tuner malfunction
B15B4
When one of the conditions below is met:
  1. Mechanical communication error
  2. Load/Eject malfunction
  3. Read malfunction
  4. Mechanical malfunction
B15B5
When one of the conditions below is met:
  1. Mechanical communication error
  2. Load/Eject malfunction
  3. Read malfunction
  4. Mechanical malfunction
B15B7
"Bluetooth" module malfunction

INSPECTION PROCEDURE

HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← DIAGNOSTIC TROUBLE CODE CHART (from Aug 2014)B1550 DAB Tuner Malfunction (+ 7 more codes) (from Aug 2014) →