2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

U0073 Control Module Communication Bus OFF

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Also covers:

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.

HINT:
If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC Code
DTC Detection Condition
Trouble Area
U0073
Control module communication bus off
CAN communication system
U0100
Lost communication with ECM
U0114
Lost Communication with 4WD Control ECU
U0126
Lost communication with steering angle sensor
U0129
Lost communication with skid control ECU (brake actuator assembly)
U0140
Lost communication with main body ECU

INSPECTION PROCEDURE


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    Result 
    Result
    Proceed to
    DTC U0073, U0100, U0114, U0126, U0129 and U0140 are not output
    A
    DTC U0073, U0100, U0114, U0126, U0129 or U0140 is output (for LHD with Entry and Start System)
    B
    DTC U0073, U0100, U0114, U0126, U0129 or U0140 is output (for LHD without Entry and Start System)
    C
    DTC U0073, U0100, U0114, U0126, U0129 or U0140 is output (for RHD with Entry and Start System)
    D
    DTC U0073, U0100, U0114, U0126, U0129 or U0140 is output (for RHD without Entry and Start System)
    E

HINT:
  1. If CAN communication system DTCs are stored, they may also be stored in other systems.
  2. If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
  3. If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs (Click here).



B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)

D
GO TO CAN COMMUNICATION SYSTEM (Click here)

E
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← C1694 Steering Angle Initialization Incomplete (from Aug 2014)U0073 Control Module Communication Bus OFF (+ 5 more codes) (from Aug 2014) →