TERMINALS OF ECU
System information · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| PARKING ASSIST ECU |


Disconnect the I6 and I7 parking assist ECU connectors.
Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
I6-1 (+B) - I6-4 (GND1)
L - W-B
Power source signal
Always
10 to 16 V
I6-4 (GND1) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
I6-8 (IG) - I6-4 (GND1)
L - W-B
IG Power source signal
Engine switch on (IG)
10 to 16 V
Engine switch off
Below 1 V
I6-9 (ACC) - I6-4 (GND1)
P - W-B
ACC Power source signal
Engine switch on (ACC)
10 to 16 V
Engine switch off
Below 1 V
I7-8 (BLSW) - I6-4 (GND1)
L - W-B
Wide view front and side monitor switch power source signal
Engine switch on (IG), wide view front and side monitor switch on
10 to 16 V
Reconnect the I6 and I7 parking assist ECU connectors.
Measure the voltage, resistance and waveform according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
I6-10 (TX-)
LG
AVC-LAN communication signal
-
-
I6-11 (TX+)
L
AVC-LAN communication signal
-
-
I7-10 (SCV+) - I7-33 (SGND)
R - GR
Passenger side television camera display signal input
Engine switch on (IG), wide view front and side monitor switch on, camera lens not covered, displaying image
Pulse generation
(See waveform 1)
Engine switch on (IG), wide view front and side monitor switch on, camera lens covered, blacking out screen
Pulse generation
(See waveform 2)
I7-28 (DCB+) - I7-29 (DGND)
B - GR
Power source to driver side television camera
Engine switch on (IG), wide view front and side monitor switch on
5.5 to 7.05 V
I7-29 (DGND) - I6-4 (GND1)
GR - W-B
Driver side television camera ground (shield)
Always
Below 1 Ω
I7-30 (DCV+) - I7-29 (DGND)
R - GR
Driver side television camera display signal input
Engine switch on (IG), wide view front and side monitor switch on, camera lens not covered, displaying image
Pulse generation
(See waveform 1)
Engine switch on (IG), wide view front and side monitor switch on, camera lens covered, blacking out screen
Pulse generation
(See waveform 2)
I7-31 (DCV-) - I7-29 (DGND)
W - GR
Driver side television camera ground
Always
Below 1 V
I7-32 (SCB+) - I7-33 (SGND)
B - GR
Power source to passenger side television camera
Engine switch on (IG), wide view front and side monitor switch on
5.5 to 7.05 V
I7-33 (SGND) - I6-4 (GND1)
GR - W-B
Passenger side television camera ground (shield)
Always
Below 1 Ω
I7-34 (SCV-) - I7-33 (SGND)
W - GR
Passenger side television camera ground
Always
Below 1 V
Using an oscilloscope, check waveform.

Text in Illustration *a
Waveform 1
*b
Waveform 2
*c
Synchronized Signal
*d
Video Waveform
- HINT:
- The video waveform changes according to the image sent by the side television camera assembly.
Waveform 1
Measurement Condition Item
Content
Terminal No. (Symbol)
I7-10 (SCV+) - I7-33 (SGND)
I7-30 (DCV+) - I7-29 (DGND)
Tool Setting
200 mV/DIV., 50 μsec./DIV.
Condition
Engine switch on (IG), wide view front and side monitor switch on, camera lens not covered, displaying image
Waveform 2
Measurement Condition Item
Content
Terminal No. (Symbol)
I7-10 (SCV+) - I7-33 (SGND)
I7-30 (DCV+) - I7-29 (DGND)
Tool Setting
200 mV/DIV., 50 μsec./DIV.
Condition
Engine switch on (IG), wide view front and side monitor switch on, camera lens covered, blacking out screen
| NAVIGATION RECEIVER ASSEMBLY (for Navigation Receiver Type) (Click here) |
| RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type) (Click here) |