General
Symptom
|
Suspected Area
|
See page
|
When the front and side monitor main switch on, the side monitor image is not displayed (screen is not black).
|
Proceed to ""CHK" message(s) are displayed on the SIGNAL CHECK screen"
|
Click here
|
Data List/Active Test - AISIC Output Status
|
Click here
|
Proceed to "Image from Camera for Side Monitor is Abnormal"
|
Click here
|
When the front and side monitor main switch on, the side monitor image is not displayed (screen is black).
|
Data List/Active Test - AISIC Output Status
|
Click here
|
Proceed to "Image from Camera for Side Monitor is Abnormal"
|
Click here
|
When the front and side monitor main switch off, the side monitor image is displayed.
|
Proceed to ""CHK" Message(s) are Displayed on the SIGNAL CHECK Screen"
|
Click here
|
Navigation receiver assembly (for Navigation Receiver Type)
|
Click here
|
Radio and display receiver assembly (for Radio and Display Type)
|
Click here
|
Display Malfunction
Symptom
|
Suspected Area
|
See page
|
Assist lines are not displayed.
|
Parking assist ECU (for LHD)
|
Click here
|
|
Parking assist ECU (for RHD)
|
Click here
|
"System initializing" is displayed.
|
Correct the steering angle neutral point
|
Click here
|
Images from all cameras (rear and side television camera) are abnormal.
|
Data List/Active Test - AISIC Output Status
|
Click here
|
Proceed to "Image from Camera for Parking Assist Monitor is Abnormal"
|
Click here
|
Image from camera for side monitor is abnormal (parking assist monitor system is normal).
|
Proceed to "Image from Camera for Side Monitor is Abnormal"
|
Click here
|
Message indicating "System not ready" is displayed even after setting is finished.
|
Parking assist ECU (for LHD)
|
Click here
|
|
Parking assist ECU (for RHD)
|
Click here
|