2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

INITIALIZATION

Troubleshooting · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


INITIALIZE SIDE MONITOR SYSTEM
  1. When "System initializing" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.

    1. Fully turn the steering wheel to the right and left on the flat ground.

      NOTICE:
      Memorizing the steering angle neutral point must be carried out with the engine started. Apply the parking brake, depress the brake pedal, move the shift lever to P and make sure that the vehicle is not moving.

      HINT:
      1. The "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.
      2. If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the right and left, perform Steering Angle Setting in Calibration (Click here).

← INITIALIZATION (Aug 2013 – Jul 2014)CALIBRATION (Aug 2013 – Jul 2014) →