INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL RADIO SETTING CONDENSER |
Attach the clamp to temporarily install the radio setting condenser with wire harness to the back door.

Install the radio setting condenser with the bolt.
Attach the 8 claws to install the terminal cover with wire harness to the condenser.

| 2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY |
w/o Back Door Tire Carrier:
Attach the 15 clips to install the back door trim panel assembly.
Install the bolt.
w/ Back Door Tire Carrier:
Attach the 16 clips to install the back door trim panel assembly.
Install the bolt.
for Face to Face Seat Type:
Attach the 15 clips to install the back door trim panel assembly.
Install the bolt.
Install the screw.
Attach the claw to install the cover.
| 3. INSTALL BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type) |
Attach the 5 claws to install the back door inside handle bezel.
Install the screw.
| 4. INSTALL BACK DOOR LOCK COVER (w/o Back Door Tire Carrier) |
Attach the 6 claws to install the back door lock cover.
| 5. INSTALL TOOL CASE |
Attach the 2 claws to install the tool case.
| 6. INSTALL UPPER TOOL BOX PANEL SUB-ASSEMBLY |
Attach the 3 claws.

Install the upper tool box panel sub-assembly as shown in the illustration.
| 7. INSTALL BACK DOOR TRIM COVER |
Attach the 4 claws.

Install the back door trim cover as shown in the illustration.
| 8. INSTALL BACK DOOR SIDE GARNISH RH |
Attach the 2 clips and claw to install the back door side garnish.
| 9. INSTALL BACK DOOR SIDE GARNISH LH |
Attach the 2 clips and claw to install the back door side garnish.
| 10. INSTALL BACK DOOR CENTER GARNISH |
Attach the 4 clips to install the back door center garnish.
