2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT RADIO SETTING CONDENSER

  1. B240495
    Using a screwdriver, move the cover as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

  1. B240494E01
    Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Radio Setting Condenser)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A - C
    Always
    10 kΩ or higher

    If the result is not as specified, replace the radio setting condenser.

  1. B240496
    Move the cover as shown in the illustration.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →