INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
Attach the 5 hooks (A).

Text in Illustration *a
Hook A
*b
Hook B
Attach the 5 hooks (B) to install the instrument panel passenger airbag.
Install the 2 screws.
| 2. INSTALL NO. 2 INSTRUMENT PANEL WIRE |
Attach the clamp to install the wire.
Connect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
| 3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
Install the instrument panel safety pad sub-assembly (Click here).
