REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
 |
Remove the instrument panel safety pad sub-assembly (Click here).
| 2.
REMOVE NO. 2 INSTRUMENT PANEL WIRE |
 |
- Disconnect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Detach the clamp and remove the wire.
| 3.
REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
 |
- Remove the 2 screws.
- Detach the 5 hooks (A).
Text in Illustration
*a
|
Hook A
|
*b
|
Hook B
|
Detach the 5 hooks (B) and remove the instrument panel passenger airbag.