2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL TELLTALE LIGHT ASSEMBLY
  1. Install the light with the 2 screws.


2. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
  1. Attach the 4 clips to install the instrument panel finish panel end RH.


3. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

HINT:
Use the same procedure described for the No. 2 instrument panel finish panel cushion.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


5. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).

← INSPECTION (from Aug 2013)INSTALLATION (from Aug 2014) →