INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL TELLTALE LIGHT ASSEMBLY |
Install the light with the 2 screws.
| 2. INSTALL INSTRUMENT PANEL FINISH PANEL END RH |
Attach the 4 clips to install the instrument panel finish panel end RH.
| 3. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION |
- HINT:
- Use the same procedure described for the No. 2 instrument panel finish panel cushion.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 5. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).
