B2015 Open in Right Side Upper MOS
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Also covers:
- B2016 Open in Right Side Lower MOS
- B2020 Open in Left Side Upper MOS
- B2021 Open in Left Side Lower MOS
- B2025 Right Side Current Detection Circuit Malfunction Hi
- B2026 Right Side Current Detection Circuit Malfunction Lo
- B2027 Right Side Over-Current Malfunction
- B2030 Left Side Current Detection Circuit Malfunction Hi
- B2031 Left Side Current Detection Circuit Malfunction Lo
- B2032 Left Side Over-Current Malfunction
- B2035 Power Supply Relay Adherence Malfunction
- B2040 EEPROM Malfunction
- B2041 Fall of Raised Voltage
- B2043 Fall of B+ Voltage
- B2047 Seat Belt Control ECU Inner Circuit Malfunction
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
The DTCs above are output during seat belt control ECU self-diagnosis.When DTC B2015 or B2016 is stored, DTCs B2026 and B2027 are not stored.
When DTC B2020 or B2021 is stored, DTCs B2031 and B2032 are not stored.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B2015 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2016 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2020 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2021 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2025 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2026 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2027 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2030 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2031 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2032 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2035 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2040 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2041 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2043 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
| B2047 |
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. |
Seat belt control ECU |
INSPECTION PROCEDURE
| 1. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTCs B2015 to B2047 are not output.
|
|
||||
| OK | ||
| ||
