2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

B2015 Open in Right Side Upper MOS

Diagnostic trouble codes · Vehicles built from Aug 2014

Also covers:

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The DTCs above are output during seat belt control ECU self-diagnosis.
When DTC B2015 or B2016 is stored, DTCs B2026 and B2027 are not stored.
When DTC B2020 or B2021 is stored, DTCs B2031 and B2032 are not stored.
DTC Code
DTC Detection Condition
Trouble Area
B2015
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2016
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2020
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2021
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2025
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2026
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2027
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2030
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2031
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2032
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2035
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2040
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2041
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2043
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU
B2047
While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second.
Seat belt control ECU

INSPECTION PROCEDURE


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTCs B2015 to B2047 are not output.



NG
REPLACE SEAT BELT CONTROL ECU (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← B2015 Open in Right Side Upper MOS (+ 14 more codes) (Aug 2013 – Jul 2014)B2036 Power Supply Relay Malfunction Open (Aug 2013 – Jul 2014) →