2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
When installing the symbol emblem and back door name plate, heat the vehicle body, symbol emblem and back door name plate using a heat light.

Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Symbol Emblem
20 to 30°C (68 to 86°F)
Back Door Name Plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, symbol emblem or back door name plate excessively.


1. INSTALL SYMBOL EMBLEM
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new symbol emblem.

    1. Using a heat light, heat the vehicle body and a new symbol emblem.

    2. Remove the peeling paper from the face of the symbol emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the back door name plate in the position shown in the illustration.

      HINT:
      Press the symbol emblem firmly to install it.
      B236234E01
      Text in Illustration 
      *a
      Reference Values
      *b
      Back Door Relief
      *c
      Back Door End Line
      -
      -


2. INSTALL BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new back door name plate.

    1. Using a heat light, heat the vehicle body and a new back door name plate.

    2. Remove the peeling paper from the face of the back door name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the back door name plate in the position shown in the illustration.

      HINT:
      Press the back door name plate firmly to install it.


      B236237E01
      Text in Illustration 
      *a
      Reference Values
      *b
      Back Door Relief
      *c
      Back Door End Line
      -
      -

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →