2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
When removing the symbol emblem and back door name plate, heat the vehicle body, symbol emblem and back door name plate using a heat light.

Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Symbol Emblem
20 to 30°C (68 to 86°F)
Back Door Name Plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, symbol emblem or back door name plate excessively.


1. REMOVE SYMBOL EMBLEM

B236232E01
  1. Put protective tape around the symbol emblem.

  1. Insert a piano wire between the vehicle body and symbol emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the symbol emblem.

    Text in Illustration 
    *1
    Protective Tape
    *2
    Wooden Block


2. REMOVE BACK DOOR NAME PLATE

B236235E01
  1. Put protective tape around the back door name plate.

  1. Insert a piano wire between the vehicle body and back door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the back door name plate.

    Text in Illustration 
    *1
    Protective Tape
    *2
    Wooden Block

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →