P1572 Improper Aiming of Radar Sensor Beam Axis
Diagnostic trouble codes · Vehicles built from Aug 2013
DESCRIPTION
When the millimeter wave radar sensor beam axis has deviated, the ECM detects this and stores DTC P1572.| DTC Code |
DTC Detection Condition |
Trouble Area |
| P1572 |
While the vehicle speed is 50 km/h (31 mph) or more with the cruise control switch on and the millimeter wave radar sensor performing self diagnosis, axis deviation is detected for 1 second. |
Millimeter wave radar sensor assembly |
INSPECTION PROCEDURE
- NOTICE:
- When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the millimeter wave radar sensor assembly beam axis must be performed (Click here).
| 1. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
Adjust the millimeter wave radar sensor assembly (Click here).
| NEXT | |
| 2. CHECK FOR DTC |
Clear the DTCs (Click here).
Perform the following to make sure the DTC detection conditions are met.
- HINT:
- If the detection conditions are not met, the system cannot detect the malfunction.
Drive the vehicle at a speed of 50 km/h (31 mph) or more.
Turn the cruise control switch on.
Check for DTCs (Click here).
- OK:
- DTC P1572 is not output.
|
|
||||
| OK | ||
| ||
