Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
DESCRIPTION
When the ECM detects a cruise control switch on signal from the cruise control switch, it sends it to the combination meter assembly through CAN communication. Then the cruise control SET indicator light turns on.
The cruise control SET indicator light circuit uses CAN communication. If there is a malfunction in this circuit, check for DTCs in the CAN communication system before troubleshooting this circuit.
INSPECTION PROCEDURE
NOTICE:
When the ECM is replaced with a new one, initialization must be performed (Click here).
1. PERFORM ACTIVE TEST USING INTELLIGENT TESTER
Select the item below in the Active Test, and then check that the cruise control SET indicator light illuminates (Click here).