2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

TERMINALS OF ECU

System information · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
B235899E06
Text in Illustration 
*A
for LHD
*B
for RHD
  1. Disconnect the main body ECU (multiplex network body ECU) (Click here).

  2. Measure the voltage and resistance according to the value(s) in the table below.

    HINT:
    Measure the values on the wire harness side with the connector disconnected.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    A-30 (BECU) - Body ground
    -
    Battery power supply
    Always
    11 to 14 V
    A-31 (ALTB) - Body ground
    -
    Battery power supply
    Always
    11 to 14 V
    A-32 (IG) - Body ground
    -
    Ignition switch power supply
    Ignition switch ON
    11 to 14 V
    A-32 (IG) - Body ground
    -
    Ignition switch power supply
    Ignition switch off
    Below 1 V
    A-29 (ACC) - Body ground
    -
    ACC power supply
    Ignition switch ACC
    11 to 14 V
    A-29 (ACC) - Body ground
    -
    ACC power supply
    Ignition switch off
    Below 1 V
    A-11 (GND1) - Body ground
    -
    Ground
    Always
    Below 1 Ω
    G63-3 (GND2) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction in the wire harness.

  3. Install the main body ECU (multiplex network body ECU).

  4. Measure the voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    2I-27 (FLCY) - Body ground*1
    R - Body ground
    Front door LH courtesy light switch input
    Front door LH open
    Below 1 V
    2I-27 (FLCY) - Body ground*1
    R - Body ground
    Front door LH courtesy light switch input
    Front door LH closed
    11 to 14 V
    2D-31 (FLCY) - Body ground*2
    R - Body ground
    Front door LH courtesy light switch input
    Front door LH open
    Below 1 V
    2D-31 (FLCY) - Body ground*2
    R - Body ground
    Front door LH courtesy light switch input
    Front door LH closed
    11 to 14 V
    2D-15 (FRCY) - Body ground*1
    B - Body ground
    Front door RH courtesy light switch input
    Front door RH open
    Below 1 V
    2D-15 (FRCY) - Body ground*1
    B - Body ground
    Front door RH courtesy light switch input
    Front door RH closed
    11 to 14 V
    2H-26 (FRCY) - Body ground*2
    B - Body ground
    Front door RH courtesy light switch input
    Front door RH open
    Below 1 V
    2H-26 (FRCY) - Body ground*2
    B - Body ground
    Front door RH courtesy light switch input
    Front door RH closed
    11 to 14 V
    G65-3 (LCTY) - Body ground*3
    V - Body ground
    Rear door LH courtesy light switch input
    Rear door LH open
    Below 1 V
    G65-3 (LCTY) - Body ground*3
    V - Body ground
    Rear door LH courtesy light switch input
    Rear door LH closed
    11 to 14 V
    G64-6 (RCTY) - Body ground*3
    R - Body ground
    Rear door RH courtesy light switch input
    Rear door RH open
    Below 1 V
    G64-6 (RCTY) - Body ground*3
    R - Body ground
    Rear door RH courtesy light switch input
    Rear door RH closed
    11 to 14 V
    G64-19 (BCTY) - Body ground
    G - Body ground
    Back door courtesy light switch input
    Back door open
    Below 1 V
    G64-19 (BCTY) - Body ground
    G - Body ground
    Back door courtesy light switch input
    Ignition switch off, all doors closed and back door closed
    Pulse generation (See waveform 1 or 2)
    G64-11 (L2) - Body ground
    GR - Body ground
    Driver side door key-linked lock input
    Driver side door key cylinder in lock position
    Below 1 V
    G64-11 (L2) - Body ground
    GR - Body ground
    Driver side door key-linked lock input
    Ignition switch off, all doors closed and driver side door key cylinder in neutral position
    Pulse generation (See waveform 3 or 4)
    G64-24 (UL3) - Body ground
    LG - Body ground
    Driver side door key-linked unlock input
    Driver side door key cylinder in unlock position
    Below 1 V
    G64-24 (UL3) - Body ground
    LG - Body ground
    Driver side door key-linked unlock input
    Ignition switch off, all doors closed and driver side door key cylinder in neutral position
    Pulse generation (See waveform 5 or 6)
    2D-3 (ACT+) - Body ground
    L - Body ground
    Door lock motor lock drive output (all doors)
    Driver side door control switch not pushed and driver side door key cylinder in neutral position
    Below 1 V
    2D-3 (ACT+) - Body ground
    L - Body ground
    Door lock motor lock drive output (all doors)
    Lock side of driver side door control switch pushed, or driver side door key cylinder in lock position
    11 to 14 V
    2I-8 (ACT+) - Body ground*1, *3
    L - Body ground
    Door lock motor lock drive output (all doors)
    Driver side door control switch not pushed and driver side door key cylinder in neutral position
    Below 1 V
    2I-8 (ACT+) - Body ground*1, *3
    L - Body ground
    Door lock motor lock drive output (all doors)
    Lock side of driver side door control switch pushed, or driver side door key cylinder in lock position
    11 to 14 V
    2H-8 (ACT+) - Body ground*2, *3
    L - Body ground
    Door lock motor lock drive output (all doors)
    Driver side door control switch not pushed and driver side door key cylinder in neutral position
    Below 1 V
    2H-8 (ACT+) - Body ground*2, *3
    L - Body ground
    Door lock motor lock drive output (all doors)
    Lock side of driver side door control switch pushed, or driver side door key cylinder in lock position
    11 to 14 V
    2D-1 (ACTD) - Body ground
    G - Body ground
    Driver side door lock motor unlock drive output
    Driver side door control switch not pushed and driver side door key cylinder in neutral position
    Below 1 V
    2D-1 (ACTD) - Body ground
    G - Body ground
    Driver side door lock motor unlock drive output
    Unlock side of driver side door control switch pushed, or driver side door key cylinder in unlock position
    11 to 14 V
    2D-2 (ACT-) - Body ground
    W - Body ground
    Door lock motor unlock drive output (except driver side)
    Driver side door control switch not pushed and driver side door key cylinder in neutral position
    Below 1 V
    2D-2 (ACT-) - Body ground
    W - Body ground
    Door lock motor unlock drive output (except driver side)
    Unlock side of driver side door control switch pushed, or driver side door key cylinder in unlock position
    11 to 14 V
    2I-10 (ACT-) - Body ground*1, *3
    W - Body ground
    Door lock motor unlock drive output (except driver side)
    Driver side door control switch not pushed and driver side door key cylinder in neutral position
    Below 1 V
    2I-10 (ACT-) - Body ground*1, *3
    W - Body ground
    Door lock motor unlock drive output (except driver side)
    Unlock side of driver side door control switch pushed, or driver side door key cylinder in unlock position
    11 to 14 V
    2H-10 (ACT-) - Body ground*1, *3
    W - Body ground
    Door lock motor unlock drive output (except driver side)
    Driver side door control switch not pushed and driver side door key cylinder in neutral position
    Below 1 V
    2H-10 (ACT-) - Body ground*1, *3
    W - Body ground
    Door lock motor unlock drive output (except driver side)
    Unlock side of driver side door control switch pushed, or driver side door key cylinder in unlock position
    11 to 14 V
    G64-7 (LSFL) - Body ground
    G - Body ground
    Front door LH lock position switch input
    Front door LH unlocked
    Below 1 V
    G64-7 (LSFL) - Body ground
    G - Body ground
    Front door LH lock position switch input
    Ignition switch off, all doors closed and front door LH locked
    Pulse generation (See waveform 7 or 8)
    G64-18 (LSFR) - Body ground
    G - Body ground
    Front door RH lock position switch input
    Front door RH unlocked
    Below 1 V
    G64-18 (LSFR) - Body ground
    G - Body ground
    Front door RH lock position switch input
    Ignition switch off, all doors closed and front door RH locked
    Pulse generation (See waveform 9 or 10)
    2H-25 (LSWL) - Body ground*1, *3
    B - Body ground
    Rear door LH lock position switch input
    Rear door LH unlocked
    Below 1 V
    2H-25 (LSWL) - Body ground*1, *3
    B - Body ground
    Rear door LH lock position switch input
    Ignition switch off, all doors closed and rear door LH locked
    Pulse generation (See waveform 11 or 12)
    2D-16 (LSWL) - Body ground*2, *3
    B - Body ground
    Rear door LH lock position switch input
    Rear door LH unlocked
    Below 1 V
    2D-16 (LSWL) - Body ground*2, *3
    B - Body ground
    Rear door LH lock position switch input
    Ignition switch off, all doors closed and rear door LH locked
    Pulse generation (See waveform 13 or 14)
    G63-2 (LSWR) - Body ground*3
    V - Body ground
    Rear door RH lock position switch input
    Rear door RH unlocked
    Below 1 V
    G63-2 (LSWR) - Body ground*3
    V - Body ground
    Rear door RH lock position switch input
    Ignition switch off, all doors closed and rear door RH locked
    Pulse generation (See waveform 15 or 16)
    G65-13 (LSWB) - Body ground
    SB - Body ground
    Back door lock position switch input
    Back door lock unlocked
    Below 1 V
    G65-13 (LSWB) - Body ground
    SB - Body ground
    Back door lock position switch input
    Ignition switch off, all doors closed and back door locked
    Pulse generation (See waveform 17 or 18)
    2A-25 (GSW) - Body ground
    B - Body ground
    Center airbag sensor signal
    Ignition switch ON with the center airbag sensor assembly connector disconnected
    4.5 to 5.5 V
    1. *1: for LHD
    2. *2: for RHD
    3. *3: for 5 Door
    If the result is not as specified, the main body ECU (multiplex network body ECU) or driver side junction block assembly may have a malfunction.

  5. B199631E01
    Using an oscilloscope, check waveform 1.
    Waveform 1 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-19 (BCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door closed

  6. B199632E01
    Using an oscilloscope, check waveform 2.
    Waveform 2 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-19 (BCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door closed

  7. B201885E01
    Using an oscilloscope, check waveform 3.
    Waveform 3 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-11 (L2) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door key cylinder in neutral position

  8. B201886E01
    Using an oscilloscope, check waveform 4.
    Waveform 4 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-11 (L2) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door key cylinder in neutral position

  9. B199631E01
    Using an oscilloscope, check waveform 5.
    Waveform 5 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-24 (UL3) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and driver side door key cylinder in neutral position

  10. B199632E01
    Using an oscilloscope, check waveform 6.
    Waveform 6 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-24 (UL3) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and driver side door key cylinder in neutral position

  11. B199631E01
    Using an oscilloscope, check waveform 7.
    Waveform 7 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-7 (LSFL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door LH locked

  12. B199632E01
    Using an oscilloscope, check waveform 8.
    Waveform 8 (Reference) 
    Item
    Content
    Terminal No. (Symbol)
    G64-7 (LSFL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door LH locked

  13. B199631E01
    Using an oscilloscope, check waveform 9.
    Waveform 9 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-18 (LSFR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door RH locked

  14. B199632E01
    Using an oscilloscope, check waveform 10.
    Waveform 10 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-18 (LSFR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door RH locked

  15. B199631E01
    Using an oscilloscope, check waveform 11.
    Waveform 11 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2H-25 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  16. B199632E01
    Using an oscilloscope, check waveform 12.
    Waveform 12 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2H-25 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  17. B199631E01
    Using an oscilloscope, check waveform 13.
    Waveform 13 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2D-16 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  18. B199632E01
    Using an oscilloscope, check waveform 14.
    Waveform 14 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2D-16 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  19. B201885E01
    Using an oscilloscope, check waveform 15.
    Waveform 15 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G63-2 (LSWR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door RH locked

  20. B201886E01
    Using an oscilloscope, check waveform 16.
    Waveform 16 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G63-2 (LSWR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door RH locked

  21. B199631E01
    Using an oscilloscope, check waveform 17.
    Waveform 17 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G65-13 (LSWB) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door locked

  22. B199632E01
    Using an oscilloscope, check waveform 18.
    Waveform 18 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G65-13 (LSWB) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door locked


CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (Click here)
← TERMINALS OF ECU (Aug 2013 – Jul 2014)DTC CHECK / CLEAR (from Aug 2013) →